Petro Parda Co. Enginering, supply and construction of oil, gas & waste water treatment
Click to rate this post!
[Total: 1 Average: 5]
Two-Inch System Accessories
PROTECTIVE COVERS
| Description | Application |
| Cover with 0.5 inch NPT Hole |
Continuous Monitoring with pressure retaining seal and 0.5 inch NPT hole for permanent probe adaptor |
| Cover with Hole | Continuous Monitoring |
| Cover without Hole | Intermittent Monitoring – Chemical Injection |
| Cover without Hole | Intermittent Monitoring |
| Cover and Bleed Valve | Provides a secondary seal in case of leaks |
| Cover, Bleed Valve and Pressure Gauge | Provides a secondary seal in case of leaks |
| Cover, Bleed Valve Pressure Gauge and 0.5 inch NPT Hole |
Provides a secondary seal whilst permitting continuous monitoring – not for use above 4000 PSI |
SERVICE EQUIPMENT
| Description | Application |
| Thread Tap Assembly |
Maintenance of threads in the Access Fitting Body |
| Thread Die Assembly | Maintenance of threads on the Solid and Hollow Plug Bodies |
| Seat Reamer | Removal of rust, scale etc. from the plug seat in the Access Fitting Body |
| Thread brush | For the removal of debris from the Access Fitting Body threads |
| 3 inch Acme Thread Cleaner |
Maintenance of the 3 inch Acme Thread on the Access Fitting Body |
| Lithium Grease | Multo Purpose Grease |
| Silicone Grease | For use in light hydrocarbon liquids |
| Cleaning Tube Assy |
For cleaning sand and debris from the Access Fitting Body Threads before installation of Solid and Hollow Plugs under pressure
|
