Breaking News

Access Fittings

Two-Inch System Access Fitting Assemblie

اكسس فيتينگ 310x148 Two Inch System Access Fitting Assemblie

[Total: 1    Average: 5/5] Two Inch System makes it possible to insert and retrieve a complete range of corrosion monitoring, erosion monitoring, biomonitoring, hydrogen monitoring, chemical injection and sampling system probes, quills and nozzles whilst the operating system, vessel or pipeline remains operational and at full operational pressure. A …

Read More »

Seal and “O” Rings

متعلقات سيستم دو اينچ 310x165 Seal and O Rings

[Total: 1    Average: 5/5] Seal and “O” Rings Material Temperature Range “O” Ring, Viton ۵۰o F to +350o+F- Primary Packing, Teflon “O” Ring, Ethylene Propylene Steam to +450oF Primary Packing, Vespel “O” Ring, Kalrez or Chemraz ۳۵۰o F to +500o+F- Silicone   Primary Packing, Vespel In Excess of 500oF Primary Packing, …

Read More »

Two-Inch System Retriever and Service Valve Kits

شير سرويس و رتريور خوردگي 310x165 Two Inch System Retriever and Service Valve Kits

[Total: 1    Average: 5/5] The Retriever and Service Valve permit safe and simple removal of a range of monitoring probes and chemical injection devices whilst the pipeline or vessel is under operating pressure. The retrieval tool has been designed to operate on the principal of balancing the pressure acting …

Read More »

Two Inch System Service Valve Kits

شير سرويس 310x165 Two Inch System Service Valve Kits

[Total: 1    Average: 5/5] Service valves are required to connect the retriever tool to the Access Fitting to be serviced; its primary function is to contain the line pressure whilst the monitoring probe/injection device is replaced or removed. Designed for ease of use in connection with a Retriever Tool, …

Read More »

Hot Tap Tool

هات تپ 194x165 Hot Tap Tool

[Total: 1    Average: 5/5] Hot Tap Tool The Hot Tap Tool provides a safe and reliable method of hot tapping high pressure access fittings on presented pipelines or vessels   OPERATION    A Special cutter assembly is installed in the access fitting previously welded onto the pipe. To tap …

Read More »

Two-Inch System Accessories

protective cover 310x165 Two Inch System Accessories

[Total: 1    Average: 5/5] PROTECTIVE COVERS    Description Application Cover with 0.5 inch NPT Hole Continuous Monitoring with pressure retaining seal and 0.5 inch NPT hole for permanent probe adaptor Cover with Hole Continuous Monitoring Cover without Hole Intermittent Monitoring – Chemical Injection Cover without Hole  Intermittent Monitoring Cover and Bleed …

Read More »

This site is protected by