ER6104 660x330 ER6104 Electrical Resistance Probe with Packing Gland Flange and Cylindrical Element

ER6104 Electrical Resistance Probe with Packing Gland Flange and Cylindrical Element

Click to rate this post!
[Total: 1 Average: 5]

Model ER 6104 – Electrical Resistance Probe
with Packing Gland Flange and Cylindrical Element

Model ER6104 is a retractable length, flange-mounted, electrical resistance probe. The probe is ideally suited for use in high pressure and/or hazardous applications where threaded fittings are not available. A specially designed packing gland is used with the probe for insertion into or retraction from a pressurised system without a process shutdown. The probe is designed to mount onto a 1″ piping system, but can easily be adapted to fit your specific requirements. The probe assembly consists of an insertion rod with an element, a hermetically sealed connector welded in place, and a packing gland.

A safety cable and safety nut are also provided to prevent blowout. A velocity shield can be added to the assembly if required. Standard packing material in the packing gland is Teflon, however, grafoil packing can be provided for high temperature applications. Several standard elements and lengths are available to meet your specific needs. (Refer to the Element and Alloy Selection Chart for more information

Check Also

ER7210 310x165 ER7210 Electrical Resistance Probe with Large Flush Element

ER7210 Electrical Resistance Probe with Large Flush Element

Click to rate this post! [Total: 3 Average: 5]Model ER 7210 – Electrical Resistance Probe for …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by petroparda.com