پمپ HTM SS 450x330 HTM SS

HTM SS

Click to rate this post!
[Total: 3 Average: 5]

Stainless steel mag-drive centrifugal pumps.

Mag drive centrifugal pumps series HTM SS are made of AISI 316 or other metallic materials (Hastelloy B or titanium) and are suitable for hydrocarbons, solvents and dangerous liquids. Thanks to the innovative mag drive system, pumps model HTM SS reduce the risks of losses and the maintenance costs. The transmission of the motion occurs through magnetic joints without using mechanical seals. This guarantees the maximum safety and efficiency.

The pumped liquid has to be clean and without solids in suspension.

Pumps series HTM SS 316 are also available in ATEX version for zone 1 and 2.

DESIGN OF MAGNETIC DRIVE CENTRIFUGAL PUMPS MOD. HTM SS316

Magnetic drive pumps have a particular sealless design that is suitable to pump corrosive and dangerous liquids thanks to the high chemical resistance and absence of leakage and emissions. The structure is really simple so that the pump requires a very reduced maintenance with consequent save in terms of repairing and spare parts costs during the pump life. The external magnet placed on the drive shaft transmits the motion to the internal magnet connected to the impeller which rotates and moves the fluid through the pump.

Main features:

  • Material in contact with the liquid: casing and impeller: stainless steel AISI 316; O-ring EPDM/VITON; bushing: PTFEC/GRAPHITE; shaft: Hastelloy C276
  • Flow up to 32 m3/h; pressure up to 24 mlc
  • Max temperature: 120 °C
  • Max viscosity: 200 cSt
  • Pressure rating NP 10 /NP 16/NP 25

Upon request the pump can be supplied with:

  • flanges
  • baseplate
  • dry running protection

Typical applications:

  • Corrosive, toxic, noxious and carcinogenic liquids
  • Hydrocarbons, pyrophorics and other flammables
  • Heat transfer oils
  • Refrigerants and cryogenics
  • Radioactive liquids

Available materials of construction: AISI 316, Hastelloy B, TITANIUM

Industries supplied: Chemical, petrochemical, pharmaceutical, paper mills, textile industry, food processing, sugar plants, dairies, electronics, water treatment plants, power plant stations and any hazardous chemical applications.

۵۰ HZ 60 HZ
Flow 0,5÷۳۲ m3/h 3÷۱۸۵ GPM
Max Head 24 mcl 110 ft
Temp -40°/+۱۶۰° C -40°/+۳۲۰° F
Mawp 10 BAR 150 PSI
  

Download PDF catalogueFormat: PDF
Dimensions 1.90 Mb
Download technical dataFormat: PDF
Dimensions 2.18 Mb
Download use and maintenance manualFormat: PDF
Dimensions 2.18 Kb

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by petroparda.com