MS2500E 660x269 MS2500E corrosion transmitter

MS2500E corrosion transmitter

Click to rate this post!
[Total: 4 Average: 4.8]
MS2500E corrosion transmitter

The MS2500E is a microprocessor controlled transmitter that features transmission through a 4- 20 mA current loop. The unit is designed to provide a direct linear measurement of corrosion occurring at a specific location. 

The MS2500E is encased in a UL-approved explosion and weather proof NEMA enclosure. Operating temperatures range from 0 o F to 140 o F. The unit provides excellent results with all electrical resistance probes, especially the wire and tube loop types. The instrument is supplied with a 5-foot instrument-to-probe extension cable with connector. 

Information can be transmitted to the ms2510 Receiver or a customer-supplied data receiver via a 4 – 20 mA current loop. The 4 -20 mA signal range permits the unit to be used with a variety of receivers with minimal programming required by the user.

Corrosion rate measurements are made with the electrical resistance method. The electrical resistance method has a wide range of applications since it can be used in conductive or non-conductive environments including oil and gas. The unit measures the change in resistance of the probe element as metal loss occurs. The rate of change is directly proportional to the corrosion rate.

Check Also

ER7210 310x165 ER7210 Electrical Resistance Probe with Large Flush Element

ER7210 Electrical Resistance Probe with Large Flush Element

Click to rate this post! [Total: 3 Average: 5]Model ER 7210 – Electrical Resistance Probe for …

One comment

  1. Dear Sirs,

    Please quote us as below item

    MFG: METAL SAMPLES
    P/N: MS2500L-236 + LP234420108000
    TRANSMITTER, CORROSION, C/W SENSOR
    CORROSION TRANSMITTER MODEL MS2500L-236 C/W SENSOR LP234420108000. Qty : 1 set

    Thanks
    Bill Nguyen

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by petroparda.com