Access Fittings

Two-Inch System Access Fitting Assemblies Two Inch System makes it possible to insert and retrieve a complete range of corrosion monitoring, erosion monitoring, bio monitoring, hydrogen monitoring, chemical injection and sampling system probes, quills and nozzles whilst the operating system, vessel or pipeline remains operational and at full operational pressure. …

Seal and “O” Rings Material Temperature Range “O” Ring, Viton ۵۰o F to +350o+F- Primary Packing, Teflon “O” Ring, Ethylene Propylene Steam to +450oF Primary Packing, Vespel “O” Ring, Kalrez or Chemraz ۳۵۰o F to +500o+F- Silicone   Primary Packing, Vespel In Excess of 500oF Primary Packing, Nitronic 60Do not use “O” …

Two-Inch System Retriever and Service Valve Kits The Retriever and Service Valve permit safe and simple removal of a range of monitoring probes and chemical injection devices whilst the pipeline or vessel is under operating pressure. The retrieval tool has been designed to operate on the principal of balancing the …

Two Inch System Service Valve Kits Service valves are required to connect the retriever tool to the Access Fitting to be serviced; its primary function is to contain the line pressure whilst the monitoring probe/injection device is replaced or removed. Designed for ease of use in connection with a Retriever …

Hot Tap Tool The Hot Tap Tool provides a safe and reliable method of hot tapping high pressure access fittings on presented pipelines or vessels OPERATION  A Special cutter assembly is installed in the access fitting previously welded onto the pipe. To tap a hole through the pipe wall, a …

Two-Inch System Accessories PROTECTIVE COVERS    Description Application Cover with 0.5 inch NPT Hole Continuous Monitoring with pressure retaining seal and 0.5 inch NPT hole for permanent probe adaptor Cover with Hole Continuous Monitoring Cover without Hole Intermittent Monitoring – Chemical Injection Cover without Hole  Intermittent Monitoring Cover and Bleed Valve Provides …